Outdoor Kitchen Cabinets, Design & Grill Islands Products

For top loaded, self-rimming grills. Choose the cabinet width to fit your specific grill. Available in 36″, 42″, 48″, 54″, 60″, & 72″ widths for standard (30″) and oversized (37″) depth cabinets. Request a printed product catalog or call us at 877-740-8723 for more information. Cabinet ships in knock-down box. Easy on-site assembly required.

For front loaded doors, drawers and various accessories. Choose the cabinet width to fit your specific accessory. Our adjustable vertical rail system provides solid framing for component installation along the cabinet’s front face and can be placed to center or offset the accessory. Comes with VAR and HAR drawer supports. Available in 18″, 24″, 30″, 36″, 42″, & 48″ widths for standard (30″) and oversized (37″) depth cabinets. Request a printed product catalog or call us at 877-740-8723 for more information. Cabinet ships in a knock-down box. Easy on-site assembly required.

Used as a kitchen filler cabinet or for drop-in (countertop loaded) accessories. Available in 6″, 12″, 18″, 24″, 30″, & 36″ widths for standard (30″) and oversized (37″) depth cabinets. Request a printed product catalog or call us at 877-740-8723 for more information. Cabinet ships in knock-down box. Easy on-site assembly required.

Used to seal off the end (sides) of a cabinet or run of cabinets. Includes two 35″ vertical adjustable support rails. Available in standard (30″) and oversized (37″) depths. Request a printed product catalog or call us at 877-740-8723 for more information. *Adds ½” flush finsish-ready surface width to each side.

Cabinet for non-rated outdoor refrigerators. Supplied with drop-in floor and fits refrigerators up to 22″ wide × 33″ high. Cabinet ships in knock-down box. Easy on-site assembly required.

Pre-sheeted panel to enclose the back side of an outdoor ice maker. Fits ice makers up to 15″ wide × 33″ high. Available in 18″ & 25″ widths. Assembled panel ships in knock-down box.

Cabinet frame for a 90° corner connection to create an “L“ shaped kitchen layout. Available for use with standard and oversized depth cabinets. Request a printed product catalog or call us at 877-740-8723 for more information. Cabinet ships in knock-down box. Easy on-site assembly required.

Wedge frame to create a 45° turn when connecting standard 90° angled cabinets. Available for use with standard (30″) and oversized (37″) depth cabinets. Request a printed product catalog or call us at 877-740-8723 for more information. Cabinet ships in knock-down box. Easy on-site assembly required.

Used as a 90° corner connection with a 45° front face. Available for use with standard (30″) and oversized (37″) depth cabinets. Comes with adjustable front vertical rails (FVAR) for front loaded door installation. Top allows for fire, ice or sink style drop-in components. Rear sides of cabinet come with studs welded in place. Request a printed product catalog or call us at 877-740-8723 for more information.

Cabinet base for a dining, balcony or bar height table top. Can accommodate up to a 29″ fire bowl or ice chest, umbrella hole, etc. Cabinet comes with adjustable vertical rails on one side to accommodate up to a 15½” wide access door – providing for propane tank insertion or storage. Cabinet ships in knock-down box. Easy on-site assembly required.

Wall frame for an “L” return kitchen layout. Standard Dimensions: 6½” deep (7″ backsplash at counter meeting) × 42½” high × 36″, 48″ or 60″ in width. Rail and studs supports are included at the base cabinet meeting for screw base attachment and cladding application. Right or left of base cabinet must be specified. Cabinet ships in knock-down box. Easy on-site assembly required.

Cabinet frame to be used with ceramic cookers, power burners and other components that require a dropped cooking surface condition. Backsplash is optional. When using the backsplash, the base cabinet depth goes from 29″ to 36″ to accommodate hood clearance. The available heights of the base cabinet can position most ceramic cookers to be either “nested” within a countertop or left open. Specify base cabinet model number by Width-Height-Depth. Order back walls separately to create a matching set. (Cabinet height combined with backsplase height must equal 35″.)

Optional backsplash for drop base cabinets. Backsplash comes with back wall cladding to cover entire height of the cabinet. Order back walls separately to create a matching set. Cabinet height combined with back wall height must equal 35″. Side panel cladding included as needed. When using the back wall, the base cabinet depth goes from 29″ – 36″ to accommodate lid clearance.

Wall frame for kitchen backsplash. 5″ deep × 7″ tall is standard. To be attached to top back of cabinet. Mid-span stud supports are included for widths over 30″. Side panel cladding included as needed. Ships fully assembled.

NOTE: Backsplashes are avialble for  GC, FLBC, BC, CC, WBC, FLCC45, and SBC cabinets for both standard and over-sized frames.